机械类/BL系列台式车床进给结构/源文件/设计图册/素材资料

注意：现成的资料仅供参考使用，切勿直接交稿，买去后，对资料内容进行相应的检查并做适当修改再交稿。现成的设计资料，本店不提供售后修改服务，如果您确实需要我们帮忙修改，我们需要根据情况适当收取修改费用

目  录  
 
1 财务总监制度及财务总监界定   2
1.1 财务总监制度的定义   2
1.2 财务总监制度的性质 2
1.2.1 对经营者的监督        2
1.2.2 实质上代表所有者利益 3
2 财务总监制度     4
2.1 财务总监制度 4
致  谢 5
参考文献 6
附录： 7
外文资料与中文翻译 7

摘  要
本文介绍了BL台式车床的进给结构的设计过程，主要为机械件的设计。因BL台式车床为小型车床，故在各个部分和零件的计算和选用过程中在满足设计要求的前提下（刚度、强度等），尽量选用尺寸较小的部件和零件。BL台式车床的进给结构的设计包括了五部分的设计。第一部分，BL台式车床总体方案设计；第二部分，进给箱的设计；第三部分，丝杠、光杠的设计；第四部分，溜板箱的设计；第五部分，刀架的选用。
进给箱是台式车床的主要部件之一，其作用是实现进给量的变换和各种螺纹螺距的变换。丝杠与光杠用以联接进给箱与溜板箱，并把进给箱的运动和动力传给溜板箱，使溜板箱获得纵向直线运动。溜板箱：是车床进给运动的操纵箱，内装有将光杠和丝杠的旋转运动变成刀架直线运动的机构，通过光杠传动实现刀架的纵向进给运动、横向进给运动和快速移动，通过丝杠带动刀架作纵向直线运动，以便车削螺纹。它的功能是装夹刀具，使刀具作纵向、横向或斜向进给运动。
关键词：BL台式车床  进给箱  丝杠与光杠  溜板箱  进给结够
Abstract
This article introduces the design process of feeding structure of BL bench-type lathe, mainly for the design of mechanical components. Because BL bench-type lathe is small lathe, so under the premise of each part and parts of computation and selection process meet the design requirements (stiffness, strength, etc), we try to choose smaller parts and components. The structure design of BL bench-type lathe includes five parts design. The first part, the general scheme design. The second part, feed box design. The third part, screw, light poles design. The fourth part, slip board box design. The fifth part, the selection of cutter.
Feed box is one of the main parts of bench-type lathe, its role is to realize the federate and various thread pitch transformation. Screw and light poles are to connect feed box and slip board box, and pass on the movement and power of feed box to slip board box, to make slip board box get longitudinal straight-line move. Slip board box: is the manipulation of feeding movement lathe box, equipped with light poles and screw rotation movement into cutter linear motion institution. Through the light poles transmission realize the longitudinal cutter feeding movement, traverse movement and move fast, through the screw drive to make cutter get longitudinal linear motion, in order to cut screw thread. Its function is clamping tool, make cutter for vertical, horizontal or inclined feed movement.
Key words:   BL bench-type lathe   Feed box   Screw and light poles   Slip board box     Feed structure